Level IV: Area Source MACT Training


Course Overview

Instructor: Larry Bernson, Ph.D

DAY ONE:

Time Topic Instructor
8:30 AM Registration  
8:45 AM

Summary of MACT

  • Introduction
  • Overview of Previous Regulatory Programs Promulgated to Control Hazardous Air Emissions
  • Maximum Achievable Control Technology (MACT)
  • Hazardous Air Pollutants (HAPs)
  • Regulated Sources
  • Area Source Program Requiremens  
 Larry Bernson
10:45 AM Break  
11:15 AM

Dry Cleaning Operations

  • Process Operation
  • Hazard Summary of Perchloroethylene
  • Regulatory Timeline
Larry Bernson
12:00 PM Lunch  
1:00 PM

Dry Cleaning Operations (cont'd)

  • Detailed Review of Subpart M - National Perchloroethylene Air Emission Standards For Dry Cleaning
  • Facilities
  • Impacts of Regulation
  • Applicability
  • Standards
  • Work Practice Requirements
  • Control Device Requirements
  • Monitoring Requirements
  • Recordkeeping Requirements
  • Reporting Requirements
 Larry Bernson
3:00 PM Break  
3:15 PM

Ethylene Oxide Sterilization Facilities

  • Process Operation
  • Hazard Summary of Ethylene Oxide
  • Regulatory Timeline
  • Detailed Review of Subpart O - National Emission Standards For Ethylene Oxide Commercial Sterilization and Fumigation Operations
  • Impacts of Regulation
  • Applicability
  • Strandards
  • Initial Compliance Test
  • Determination of Baseline Operating Parameters
  • Continuous Compliance Monitoring Requirements
  • Control Device Work Practice Requirements
  • Recordkeeping Requirements
  • Reporting Requirements
 Larry Bernson

DAY TWO:

Time Topic Instructor
8:30 AM

Hard and Decorative Chromium Electroplating and Chromium Anodizing Tanks

  • Process Operation
  • Basic Plating Primer
  • Chromium Electroplating
  • Chromium Anodizing
  • Ohm's Law
  • Faraday's Law
  • Hazard Summary of Chromium
  • Physical Properties
  • Health Hazard Information
  • Regulatory Timeline
Larry Bernson
10:30 AM Break  
10:45 AM

Hard and Decorative Chromium Electroplating and Chromium Anodizing Tanks (cont'd)

  • Detailed Review of Subpart N - National Emission Standards for Chromium Emissions from Hard and Decorative Chromium Electroplating and Chromium Anodizing Tanks
  • Impacts of Regulation
  • Applicability
  • Standards
  • Emission Rate Calculation Procedure #1
  • Emission Rate Calculation Procedure #2
  • Emission Rate Calculation Procedure #3
  • Performance Test Requirements and Test Methods
  • Method 306, 306A, 306B
  • Monitoring Requirements
  • Recordkeeping Requirements
  • Reporting Requirements
  • Notification Requirements
Larry Bernson
12:00 PM Lunch  
1:00 PM

Halogenated Solvent Cleaning

  • Process Operation
  • Classification of Cleaning Machines
  • Hazard Summary of Regulated Halogenated Solvents
  • Regulatory Timeline
  • Detailed Review of Subpart T - National Emission Standards for Halogenated Solvent Cleaning
  • Impacts of Regulation
  • Applicability
  • Batch Cold Cleaning Machine Requirements
  • Batch Vapor And In-line Solvent Cleaning Machines
Larry Bernson
3:00 PM Break  
3:15 PM

Halogenated Solvent Cleaning (cont'd)

  • Equipment Standard With Work Practices
  • Equipment Design Requirements
  • Emission Control Combinations
  • Method 307
  • Monitoring Requirements
  • Control Combination Requirements
  • Overall Emission Limit
  • Recordkeeping Requirements
  • Reporting Requirements
  • Notification Requirements
Larry Bernson
4:30 PM Course Wrap-up Larry Bernson
4:45 PM Course Evaluations  

 

* Please note that this is an agenda from a previously taught course. Contact your regional consortia for any changes. Thank you!


Contact e-mail